Contact Person
( Partner )
Location : Pune
Call : +91 9850550800

Product Information

Cross Member Assembly

Cross Member Assembly

A Vehicle Cross Member Assembly is provided which includes first and second cross members each having first and second ends, and first and second connectors connects to the first ends of the cross member to vehicle structures.
Specifications
Brand: PROTO D Engineering
Detailed Description

A crossmember is a structural section, usually of steel, usually boxed, that is bolted across the underside of a monocoque / unibody motor vehicle, to support the internal combustion engine and / or transmission. For the suspension of any car to operate as it should, for proper handling, and to keep the body panels in alignment, the frame has to be strong enough to cope with the loads applied to it. It must not deflect, and it has to have enough torsional strength to resist twisting. A Vehicle Cross Member Assembly is provided which includes first and second cross members each having first and second ends, and first and second connectors connects to the first ends of the cross member to vehicle structures. The assembly includes a bracket connected to a tunnel structure on a vehicle. The bracket includes first and second brackets for connecting the second ends of the first and second cross members. At least one of the first and second cross members is configured to move laterally inward and downward into the tunnel during a sufficient lateral impact of the vehicle. Additionally, one or more seats may be mounted to the cross members such that the seats move inward and rotate away from the point of impingement during a side impact event.

close

Send Your Message

Email Id
Error message
Subject
Message
Enter between 5 to 3,000 characters, English only.

Enter Image Text *
Your message has been sent successfully.
Your message has been sent successfully. Thanks for register as non member.